CDT Audio Amp DSP 6.4BT

Our DSP and Amplifier Combination that Can Fit in Virtually any Space.

We realized there was a need for a DSP and amplifier combination that can fit in virtually any space. Welcome to the new CDT Audio DSP 6.4BT! The DSP 6.4BT, while compact in size, offers a powerful combination of features that can be used in several different configurations.

The integrated four-channel amplifier supplies 55 watts @ 4 ohms per channel and 70 watts @ 2 ohms per channel. The 6 channel DSP allows the ability to use high-level inputs, low-level RCA inputs, and Bluetooth streaming via Bluetooth 5.0.

Given the selection of input types, the DSP 6.4BT can practically be installed in any vehicle. The DSP allows the ability to sum and mix the individual channels in order to give you the output you desire. In regards to tuning, the DSP features a powerful Cirrus Logic CS47L35 chip which provides 31 bands of equalizer per channel. Each channel also has individual time alignment adjustments. 

Here are some configurations that you may be interested in using the CDT Audio DSP6.4BT:

4 speaker system with subwoofer: You can utilize the built-in 4 channel amplifier to power 4 speakers within the vehicle and then utilize the 5th and 6th channel to output to a separate mono block or 2 channel amplifier for subwoofer control.

2 Way component system with subwoofer: You can utilize the built-in 4 channel amplifier to power a set of mid-bass drivers and tweeters. The DSP will be able to handle the crossover points between the midbass driver and tweeter allowing you to run the set "active". You can use channels 5 and 6 to output to a separate monoblock or.

2 channel amplifier for subwoofer control.
3 Way component system: You can utilize the built-in 4 channel amplifier to power a set of midrange drivers and tweeters. Then you can use channels 5 and 6 to output to a separate 2 channel amplifier to power your mid-bass drivers. The DSP will be able to handle the crossover points between the mid-bass drivers, midrange drivers, and tweeters.

DSP6.4BT


 
Price (incl. warranty)
Quantity:

Price: $474.99


4ch amplifer with DSP

RMS Output Power

55w x 4ch at 4ohm

MCU

STM32F103CBT6

DSP

Cirrus Logic CS47L35 with 31 Bands EQ per Channel

ADC

Cirrus Logic CS5343

DAC

Cirrus Logic CS4361

OPA

JRC4560

IC

TPA3116D2

Tuning program

PC (window)

High input

6CH

High input sensitivity

4-9V/9V-15V select by DIP Switch

High input impedance

13R

High input summing

6ch Summing

Low input

2CH/ mixing with High IN 1,2 CH

Low input sensitivity

0.3-1.1V

Low input impedance

15K

Bluetooth

built-in bluetooth 5.0

Bluetooth audio codec

KT1025A

high out

55w x 4ch at 4ohm

low output (ch)

2ch 2V RMS

Operate temp

-30~70℃

Auto sense

High input / ACC

Sound mixing Mode

Vehicle alarm sound and navigation announcement

Size

147(L)x96.8(W)x35(H)mm

 

<< Back to Amplifiers

        Main Series
Main Series
Braxial Sets

Coaxial Sets
Complete Packages Upstage Systems
Accent Fills
Image Enhancement Kits 6x9 Sets
Bass Enhanced Sets
2 Ohms Sets
All Environement
Carspecific Packages
Installs & Mount Tips
MX Designs
Chrome Hi-Rez Audio
      Components
Amps
Accessories
Crossovers
Midwoofers
Subwoofers
Tweeters
Unity Drivers

          Reviews
MST,
The Ultimate
Lifelike Music Experience: MST Lifelike sound for Car and Home by CDT Audio
Rerurbished
Facebook    Twitter
Sales Terms >>