AF-256/020 Accent Fill

CDT Audio introduces a new audio vista in car stereo
With the Accent principle CDT Audio introduces a new audio vista in car stereo.
This approach adds highlighting to the sonic environment. Variations induced by speaker installation location limitations are now reduced at the same time as the need for expensive complex amplification is reduced to an absolute minimum. Enjoy the best sound with ease.

These systems average out acoustic discontinuities in the car’s interior.
Inevitably different spaces where your drivers are installed will favor the closer listener or be altered by interior seating and contours in the car. The CDT Audio solution for these discontinuities is to provide contributions in subtle proportions from various places to make the performance as near optimal as possible to all listeners and with all musical material. This is visually analogous to having some light everywhere without glare or shadows.

Smooth out the sound in your car today with a CDT Audio Accent System.
Additional speakers may be applied in specific locations with an attenuating filter (CDT CS-256) for adjustability to provide an attractive accent to the sound analogous to accent lighting in a display. Adjust every level any way you desire effortlessly.

Basic types of speakers:
Midrange/extended range generally cone type typically 3"- 150mm or 4"- 200mm


AF 256/020
Accent Fill System

Technical specs and contents

  • 1 pr ES-020 2” extended range mid-tweeter pods
  • 1 e/a system interface control unit w/ level control
  • Power handling: 150 watts
  • Frequency response: 100Hz-20KHz
  • Built-in variable high pass frequency options
  • Impedance: 4 ohms
  • Sensitivity: 89.2
Price (incl. warranty)

Price: $249.99


020 Accent Fill in Car Interior
  • No additional amplifiers or crossovers are required. Everything is supplied in the kit.
  • Nothing existing needs to be removed – all components are additional. However, if upgrading to CDT Audio components feel free to replace any existing components.
  • One good amplifier with 2-4 ohm capability will handle the accent systems as well as the main system. The subwoofer is virtually always separately amplified to set up the major sensitivity differences involved at the high power levels associated with bass.

<< Back to Accent Fills


Main Series
Braxial Sets

Coaxial Sets
Complete Packages Upstage Systems
Accent Fills
Image Enhancement Kits
6x9 Sets
2 Ohm Bass Enhanced
All Environment
Car specific Packages
Installs & Mount Tips
MX Designs
Chrome Hi-Rez Audio
Wideband Design & Sets
Horn Soft Dome Systems

Amps & DSP
Unity Drivers
Wideband Spkr Drivers Wideband Speaker Pods

The Ultimate
Lifelike Music Experience

MST Lifelike sound for Car and Home by CDT Audio

Sales Terms