The
CDT Audio 6X9” speakers are designed and built
for the unique demands of the car audio environment. They
are built to deliver the truest, in-car sound possible,
the most accurate and natural performance ever-the type
of performance that has earned our design team countless
awards and unanimous praise from around
the world. Smooth and accurate highs. Our exclusive use
of soft dome Tweeters combine to deliver superb detail and
incredible clarity.
The CL-69SUB sub is smooth with a fast deep clean sound
into the lowest bass frequencies. The Tweeter can
be flush or surface mounted at a location that best fit
your vehicle.
|
Specs: Model CL-69SUB
Driver data: CL-69SUB Subwoofer
Stamped Steel Frame
Carbon treated cone
Rubber surround
Diameter: 6X9" (150X230 mm)
Sensitivity: 90.1 dB
Power Handling: 100 Watt RMS/200 Watt Music. (100Hz high
pass)
Frequency Response: 45 ~ 4000 Hz
Nominal Impedance: 4 Ohms
Voice Coil Diameter:1.5" (45mm)
Dimensions:
6.625"X 9.25" Ellipse
(168.3mm X 235mm) Ellipse
(Exclusive of mounting tabs)
6" X 8.625" Ellipse (152.4mm X 219mm) Ellipse
Free Air use only °© mount in rear deck, large door or
panel.
|
Specs: Model CL-69X
2-way 6X9" Coaxial speaker
Mid woofer: 6X9" Stamped Steel Frame
Xover: 6dB.
Tweeter:1" silk dome Tweeter
Power handling: 100 Watt RMS/200 Watt Music. (100Hz high pass)
Frequency response: 45-20kHz
Sensitivity: 90.2 dB
Impedance 4 Ohm |
Specs: Model CL-69CX
2-way 6X9" component system
Mid woofer: 6X9" Stamped Steel Frame
Xover: Elliptic design 24dB.
Tweeter:1" silk dome Tweeter
Power handling: 100 Watt RMS/200 Watt Music. (100Hz high pass)
Frequency response: 45-20kHz
Sensitivity: 91.5 dB
Impedance 4 Ohm
Tweeter Surface & flush mounts |
Model CL-69SUB
